Product Information
 
A
 CB103-KIT Pentium 3.0 Ghz PC Blade server starter kit, 1 Blade, 1 H.
$1209.00
 System Configuration
 Model CB103
 Motherboard Integrated Gigabyte GA-8i865GME-775 microATX motherboard
 Processor Intel Pentium® 4 3.0 Ghz Processor, 800 Mhz FSB & 1M L2 Cache
 Chipset Intel 865G Chipset
 Processor Socket Socket 775
 PCI-Express Slot Not Supported
 PCI Slot One 32Bit PCI Slot, Support 5V addon card only. (Not Included)
 System memory 1GB DDR-400 SDRAM (Installed), supports up to 4GB
 Audio Ports 2 x Enhanced Bus Master IDE ports ( supports up to 4 IDE Drives ) Ultra DMA 100/66 (chassis support up to two hard drives)
 Ports 1 x DB9 Serial port, 1 x Parallel port, 2 x USB 2.0 ports, 1 x PS/2 Mouse port, 1 x PS2/2 Keyboard port, and three analog 6-channel audio ports.
 Network Support Intel 82562G 10/100 Mbps Fast Ethernet Port (RJ45)
 BIOS Award BIOS
 Floppy Drive Not Installed (Optional)
 Video Support Integrated 865G Chipset with onboard video
 CD-ROM Drive USB 52X CD-ROM Reader (External). (Optional)
 Hard Disk Samsung or Seagate 80GB IDE Hard Drive 7200 RPM 2MB Cache
 Software No Operating system installed. ( Comes with windows device driver CD)
 Power Supply ATX 250 watts power supply (Dual 110v/220v Auto-sensing switch)
 Power consumption Between 100 watts to 125 watts with standard configuration per blade
 Rack Support Support 2 or 4 post rack, relay rack.
 Warranty One-year limited warranty. ( Parts & Labor) Purchase the ColoMachine Extended Warranty Plan to extend your service and support up to two additional years.
   
 Specifications
   

Processor

  • Pentium 3.0 Ghz Processor
  • 1MB on-chip L2 cache
  • 800 Mhz Front Side Bus (FSB)

Memory

  • Two 184-pin DDR DRAM DIMM Sockets
  • Support for DDR 266 or 400 Non-ECC DIMM
  • Support for up to 2GB of system memory

System Chipset

  • Intel 82865G Graphics Memory Controller Hub (GMCH)
  • Intel 82801G I/O Controller HuB (ICH5)

Peripheral Interfaces

  • Four USB 2.0 ports. Supports UHCI and EHCI. (2 USB ports accessable from front.)
  • One Serial port. Supports up to 115.2Kbits/sec
  • One parallel port
  • Two parallel ATA IDE interface with UDMA 33, ATA-66/100 support
  • Two Serial-ATA Ports
  • One disk drive interface
  • PS2/ keyboard and mouse ports

Storage

  • Seagate or Samsung 80GB IDE hard Drive
  • 7200 RPM
  • 8MB Cache
  • 52X USB CD-ROM Reader. Color: Black (Optional)

Storage Bay

  • Two 3.5" hard drive bay. One is used by the 80 IDE hard drive and other one is available.

 

Video

  • Intel GMA 865G onboard graphics subsystem
  • 266 Mhz core frequency
  • Integrated 24-bit 350 Mhz RAMDAC
  • 2048 x 1536 @ 75Hz

LAN

  • 10/100 Mbit/sec LAN subsystem using the Intel 82562G platform lan connect device

Audio

  • N/A (Removed)

Expansion Capabilities

  • One 32bit PCI bus add-in card connector (Optional)
  • Support 5V addon device only.

Environmental Requirement

  • Maximum continuous power : 250 W per PC Blade
  • Line voltage : 100-240V AC
  • Frequency: 50Mhz to 60Hz, single phase
  • Operating temperature: 0 to 35 C
  • Storage temperature :-40 to 70 C
  • Relative humidity : 5% to 95% noncondensing
  • Maximum altitude: N/A

Size and Weight

  • Height: 14" (8U Rackspace) Housing Unit
  • Width: 19"
  • Depth: 22"
  • Weight: 225 Lb (fully loaded)

 

 

 
   
 

 

Home Support Contact Terms of use Privacy Policy FAQ
Quick Link >>
©2004-2006 Rackmount Distribution Inc. All rights reserved. All trademarks are property of their respective owners.