CM63 1U Rackmount system offers many advantages over the traditional 1U ATX design. Better thermal management and higher processor and I/O throughput are some of the key advantages.

THERMAL Our thermal design is simple. We move cooler air in to our system and pump the hot air out. There are several air vents opening at front and side of the system. At the rear, there is a large air blower pumping large volume of hot air out. The air flow diagram on the left illustrates the air flow path. We do not use any fancy motherboards to reduce air resistance but we make sure that our system does not over heat under any circumstances. Our goal is to offer our customers the most reliable system without spending alot.

PERFORMANCE CM63 1U server is reliable and consistence. The processor performance is more than adequate to handle projects such as web hosting, bandwidth quality testing station, small business servers and other general purpose applications. It is an ideal platform for large system deployment for testing new software or hardware design. We have enugh CM63 1U servers in stock, so you don’t have to wait. CM63 gives you the ability to get your job done fast and with in budget.

SYSTEM LAYOUT

• (A) 52X IDE CD-ROM Reader
• (B) 200 / 250 Watts Power Supply
• (C) 120GB IDE Hard Drive
• (D) Exhaust Blower
• (E) DDR266 Memory Slots
• (F) Processor Socket
• (G) 32 Bit PCI Riser Card
• (H) Front Mount / Rear Mount L Brackets
• (I) 52X IDE CD-ROM Rader
• (J) Front Accessible USB Ports
• (K) 110/200 V AC Socket
• (L) Exhaust Window
• (M) I/O Ports
• (N) PCI Slot
• (O) RJ11 (Optional Port)

FRONT and REAR LAYOUT

CABINET COMPATIBILITY There are many different sizes of open frame racks and cabinets ranging from 13U to 47U in size to choose from. CM61 is designed to work with any rackmount cabinets comply with the EIA-310-D standard. You can use either square nuts or tap-hole screws for installation (cabinet screws are not included). On the left, the picture shows 10 CM61 1U servers installed in a 12U IBM Cabinet. You can install up to 47 CM61 1u servers in a standard 47U cabinet. CM61 comes with standard front mount L brackets. It can be used as a center mount bracet as well. You will need to use a rear mount brackets (sold separately) if you have a 4 post open frame rack or cabinet. You can also purchase a pair of SR02-GD24 sliding rails to further simplify your installation process.

PCI RISER CARD PCI Riser card is an optional item. You can use the 32 PCI slot to add additional features for your CM63 1U rackmount system such as multiple high speed network ports, fiber optical network, SCSI Controller or A/D or D/A card for testing and measurement. The 32 bit PCI riser only works with a standard 5V PCI addon card. You can purchase the PCI Riser Kit as an optional item.

SLIDING RAILS SR02-GD24 Sliding rail is a simple tool which allows you to take out your CM61 without using a screw driver. A typical rackmount system installation is a two person job which requires 10 to 20 minutes to complete. Removing the 1U server also requires the same amount of efforts. Sliding rail (Q) changes all of that. With a sliding rails installed into the cabinet, you only need 2 minutes to install or remove the 1U server. Best of the all, it is a one person job. Sliding rail makes your job simpler and easier. SR024-GD24 sliding rail only support 4 post cabinet or rack (P) as demostrated on the right.