CM70 1U BTX system offers many advantages over the traditional 1U ATX design. Better thermal management and higher processor and I/O throughput are some of the key advantages.

THERMAL As the speed of processors increases, so does the need for a more efficient thermal management design. The CM70 1U BTX system offers thermal management solution based on the new Balanced Technology Extended (BTX) specification. The BTX design placed the heat generating components – such as CPU, memory chips and core chipset in-line with air flow. Since there are no more "dead corners", major heat generating components such as CPU and memory can be cooled more efficiently. Two powerful air blowes are strategicly placed at front and rear of the CM70 1U BTX server to move the cold air in and hot air out. In addition, the new BTX 1U heatsink offers more surface area than traditional heatsinks. Better air flow and larger heatsink design make CM70 one of the fastest 1U server. Currently CM70 1U BTX server supports Intel Pentium 4 processor up to 3.6Ghz.

PERFORMANCE The latest generation of Intel Pentium 4 processor-based CM70 1U BTX systems feature new technologies such as Hyper-Threading Technology and Dual-Channel DDR2 memory delivering robust performance. Because CM70 1U BTX system have extra reserves of processing power, memory and PCI Express expansion slot, you won’t outgrow it as quickly as you do with traditional ATX platform, making it a better long-term technology investment.

SYSTEM LAYOUT

• (1) 52X IDE CD-ROM Reader
• (2) CPU Heatsink Blower
• (3) Copper 1U BTX Heatsink
• (4) DDR2-400 Memory
• (5) 24-PIN ATX Connector
• (6) 16 x PCI-EXPRESS Riser
• (7) SATA Hard Drive
• (8) 250 Watts PFC Power Supply
• (9) Exhaust Blower

FRONT and REAR LAYOUT

• (14) 19" Cabinet mounting bracket
• (15) Power On/Off switch
• (16) 2x USB Ports
• (17) Hard Drive Bay
• (18) AC Socket
• (19) PCI-Express Slot
• (20) I/O Ports
• (21) RJ-11 Remote Monitoring Port (Future Use)

CABINET COMPATIBILITY There are many different sizes of open frame racks and cabinets ranging from 13U to 47U in size to choose from. CM70 is designed to work with any rackmount cabinets comply with the EIA-310-D standard. You can use either square nuts or tap-hole screws for installation (cabinet screws are not included). CM70 comes with standard front mount L brackets. It can be used as a center mount bracet as well. You will need to use rear mount brackets (sold separately) if you have 4 post open frame racks or cabinets. You can also purchase a pair of SR02-GD24 sliding rails to further simplify your installation process.