| Processor |
Intel Socket 478, single Intel Celeron
1.7Ghz Processor (400Mhz FSB) |
| Coprocessor |
Internal coprocessor |
| Chipset |
SiS® 651 Chipset (400/533Mhz FSB) |
| PCI Slots |
1 available PCI slot (Requires a PCI
riser card - not included) |
| System Memory |
2 x pin 184-pin DDR200/266 DIMM sockets
with the maximum of 2GB installed memory. (512MB DDR RAM Installed) |
| IDE/EIDE Interface |
2 x Enhanced/Bus Master IDE ports
(supports up to 4 IDE Drives) PIO Mode -3,-4 : 17MB/sec. (max) DMA Mode -2 : 16MB/sec. (max), UltraDMA 100/66/33 |
| On-Board I/O |
1 x Floppy Port (1.44MB - 2.88MB),
1 x DB9 Serial Ports (16550 Fast UART Compatible), 1 x Parallel Port, 2 x USB Ports, 1 x PS/2 Mouse Port, 1 x PS/2
Keyboard Port. |
| Network Support |
RealTek 8101L 10/100Mbps Fast Ethernet
Port (RJ45) |
| BIOS |
Phoenix/Award BIOS |
| Floppy Drive |
None |
| Video Support |
SIS 651 Integrated Video Port, up
to 1,280 x 1,024 resolutions in 256 colors (Video memory is shared with the system memory up to 64MB) |
| Keyboard / Mouse Interface |
PS/2 Style Keyboard and Mouse Ports. |
| Hard Disk Drive |
Seagate or Samsung (7200RPM) EIDE
harddisk drive. (Subject to availability) |
| CD-ROM Drive |
52X CDROM Reader (IDE) |
| Power Supply |
ATX 250 watts power supply (Dual 110V/220V
Switchable) |
| Power Consumptions |
Between 90Watts to 115 Watts with the standard configuration
(CM51-1.7G-80GBI-512MB) |
| Rack Support |
Supports 2/4 posts rack (relay rack)
- Requires Rear/ Center Mount Bracket Part#
CM50-CM-BRACKET (Not Included). |
| |
|
| Warranty |
12 Months (Parts & Labor) |
| |
|
| |
Pentium 4 Processor
Upgrade
|
| |
In theory, the MSI 6533EG-LM motherboard installed
in a CM51 will support both Intel Celeron and Pentium 4 processors. However, the CM51 unit wasn't designed for
supporting Intel Pentium 4 processor at any speed. Upgrading the CM51 with a P4 processor will cause damages to
the processor. |
-
Updated 04-14-2003 
